automobilių detalių žinynas
 | Viso detalių : 0 |
Mano miestas
Pagrindinis meniu
Transporto priemonė: TYP 190Db BM 121.110 - .111, .100 - .102; VIN numerio dalis: 121102
Grupė: 54 ELECTRICAL EQUIPMENT AND INSTRUMENTS
| # | Kodas | Pavadinimas |
|---|---|---|
| X XXXXXXXXXXXX | PART NAME MISSING | |
| BATTERY AND STARTER CABLE | ||
| 001 | A 0005414801 | BATTERY |
| A 0005412901 | BATTERY | |
| EXPORT, SPECIAL REQUEST TROPICAL DESIGN | ||
| A 0005416001 | SPECIAL COLD-START | |
| BATTERY SPECIAL REQUEST FOR REGIONS WITH COLD TEMPARATURES | ||
| 002 | A 1205400323 | FIXING FRAME |
| 003 | A 1205410124 | TIGHTENING SCREW |
| FOR HOLDING BATTERY | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR HOLDING BATTERY | ||
| HEX. NUT | ||
| M 6 DIN 934-5 S FOR HOLDING BATTERY | ||
| INSULATING HOSE, | ||
| 20-MM LONG B 16X18 SW DIN 40621 ON ANGLE OF SUPPORTING RAIL, BATTERY ORDER BY THE METER | ||
| 004 | A 0009870315 | RUBBER PLUG |
| FOR BLIND-HOLE IN FRONT WALL | ||
| 006 | A 1365401430 | STARTER CABLE |
| FROM +POLE BATTERY TO STARTER | ||
| 007 | A 1365460035 | RUBBER PROTECTIVE CAP |
| FOR STARTER CABLE | ||
| 07a | A 1869970481 | GROMMET |
| FOR STARTER CABLE THROUGH ENGINE ROOM DAMPING | ||
| 008 | A 1805400031 | GROUND CABLE |
| FROM NEG. POLE OF BATTERY TO CLUTCH HOUSING | ||
| A 1805400431 | GROUND CABLE | |
| FROM NEG. POLE OF BATTERY TO CLUTCH HOUSING | ||
| 009 | A 0009973481 | GROMMET |
| FOR GROUND CABLE THROUGH FIXING ANGLE, FRONT WALL | ||
| X XXXXXXXXXXXX | PART NAME MISSING | |
| CABLES | ||
| 015 | A 1215401405 | MAIN CABLE HARNESS |
| A 1215401505 | MAIN CABLE HARNESS | |
| 016 | A 0005450628 | HOUSING, LOWER |
| PART WITH SOCKET IS INCLUDED IN MAIN CABLE HARNESS | ||
| 017 | A 0005450080 | GASKET |
| BETWEEN HOUSING, UPPER PART AND LOWER PART IS INCLUDED IN MAIN CABLE HARNESS | ||
| A 1215401909 | CABLE HARNESS | |
| IN JACKET TUBE | ||
| A 1215402009 | CABLE HARNESS | |
| IN JACKET TUBE | ||
| 018 | A 1215401738 | ELECTRIC CABLE |
| FOR GLOW PLUG RESISTOR TO GLOW PLUG | ||
| A 1205401338 | ELECTRIC CABLE | |
| FOR GLOW PLUG RESISTOR TO GLOW PLUG | ||
| 020 | A 1215400807 | TAIL LAMP CABLE HARNESS |
| 026 | A 1215400141 | GROUND CABLE |
| FROM ENGINE TO FRONT WALL | ||
| 027 | A 1204200227 | SCREW WITH LOCKING PLATE |
| FOR GROUND CABLE AT PEDAL FLOOR | ||
| HEX. NUT | ||
| M 6 DIN 934-5 S FOR GROUND CABLE AT PEDAL FLOOR | ||
| 031 | A 0005461941 | CABLE CONNECTOR, 5-POLE |
| FOR TAIL LIGHT HARNESS | ||
| 032 | A 0005460641 | CABLE CONNECTOR, 5-POLE |
| FOR STEERING SPINDLE HARNESS | ||
| 033 | A 0005461841 | CABLE CONNECTOR, 2-POLE |
| FOR HEATING BLOWER CONNECTION | ||
| LENS-HD. SHEET | ||
| METAL SCREW B 3,9X19 DIN 7981 FOR CABLE CONNECTOR, 5-POLE, AT WHEEL ARCH PAN | ||
| LENS-HD. SHEET | ||
| METAL SCREW BZ 3,9X9,5 DIN 7981 FOR CABLE CONNECTOR AT FRONT WALL | ||
| LENS-HD. SHEET | ||
| METAL SCREW B 3,9X13 DIN 7981 FOR CABLE CONNECTOR AT REINFORCEMENT BRACKET, LEFT AND RIGHT | ||
| A 1869950220 | FIXING CLAMP | |
| FOR MAIN CABLE HARNESS TO REVERSE DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT | ||
| LENS-HD. SHEET | ||
| METAL SCREW BZ 4,8X9,5 DIN 7981 FOR MAIN CABLE HARNESS TO REVERSE DRIVE LIGHT SWITCH AT PEDAL FLOOR, RIGHT | ||
| 034 | A 1205401738 | CABLE HARNESS |
| FROM 2-POLE CABLE CONNECTOR TO REVERSE DRIVE LIGHT | ||
| 035 | A 1805460043 | BRACKET |
| FOR CABLE HARNESS TO REVERSE DRIVE LIGHT SWITCH | ||
| 036 | A 1805460143 | BRACKET |
| FOR CABLE HARNESS TO REVERSE DRIVE LIGHT SWITCH | ||
| 36a | A 0009973181 | GROMMET |
| AT BRACKET FOR CABLE HARNESS | ||
| 037 | A 1819970081 | GROMMET |
| FOR MAIN CABLE HARNESS AT FRONT WALL | ||
| 038 | A 0009972781 | GROMMET |
| FOR MAIN CABLE HARNESS AT FRONT WALL | ||
| 38a | A 0009972281 | GROMMET |
| FOR BLINKER LIGHT AT WHEEL ARCH FOR MAIN CABLE HARNESS AT FRONT WALL | ||
| 039 | A 0009883378 | CLIP |
| FOR MAIN CABLE HARNESS AT FRONT WALL | ||
| 040 | A 0009883478 | CLIP |
| FOR MAIN CABLE HARNESS AT FRONT WALL | ||
| A 0009885378 | CLIP | |
| FOR MAIN CABLE HARNESS AT FRONT WALL | ||
| A 1369950037 | FIXING CLAMP | |
| FOR MAIN CABLE HARNESS AT FRONT WALL | ||
| LENS-HD. SCREW | ||
| AM 4X12 DIN 7985 -4S FOR MAIN CABLE HARNESS AT FRONT WALL | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR MAIN CABLE HARNESS AT FRONT WALL | ||
| A 1369950135 | FIXING CLAMP | |
| FOR MAIN CABLE HARNESS AT FRONT WALL | ||
| A 0009902291 | CAGE CLIP WITH NUT | |
| FOR MAIN CABLE HARNESS AT FRONT WALL | ||
| LENS-HD. SCREW | ||
| AM 6X15 DIN 7985-4 S FOR MAIN CABLE HARNESS AT FRONT WALL | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR MAIN CABLE HARNESS AT FRONT WALL | ||
| A 1819950020 | FIXING CLAMP | |
| FOR MAIN CABLE HARNESS AT REINFORCEMENT BRACKET, LEFT AND RIGHT | ||
| LENS-HD. SCREW | ||
| AM 4X10 DIN 7985-4 S FOR MAIN CABLE HARNESS AT REINFORCEMENT BRACKET, LEFT AND RIGHT | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR MAIN CABLE HARNESS AT REINFORCEMENT BRACKET, LEFT AND RIGHT | ||
| A 1219950022 | FIXING CLAMP | |
| FOR MAIN CABLE HARNESS AT FRAME CROSS MEMBER, FRONT | ||
| HEX. -HD. | ||
| SHEET METAL SCREW B 6,3X16 DIN 7976 FOR MAIN CABLE HARNESS AT FRAME CROSS MEMBER, FRONT | ||
| A 1539950322 | FIXING CLAMP | |
| FOR CABLE FIXING FOOT DIMMER SWITCH AND GROUND CONNECTION | ||
| LENS-HD. SHEET | ||
| METAL SCREW B 4,8X9,5 DIN 7981 FOR CABLE FIXING FOOT DIMMER SWITCH AND GROUND CONNECTION | ||
| 042 | A 0009971781 | GROMMET |
| FOR FUEL TRANSMITTER PIPE | ||
| A 0009883378 | CLIP | |
| A 0009883478 | CLIP | |
| LENS-HD. SHEET | ||
| METAL SCREW B 4,8X9,5 DIN 7981 FOR GROUND CABLE ELECTR. TRANSMITTER AT REAR CROSS MEMBER | ||
| 056 | A 1205460182 | FIXING SHACKLE |
| FOR TAIL LIGHT CABLE, LEFT AND RIGHT IS FIXED TOGETHER WITH MUDGUARD AND WHEEL ARCH | ||
| LENS-HD. SCREW | ||
| AM 4X10 DIN 7985-4 S FOR GROUND CONNECTION, TAIL LIGHT | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR GROUND CONNECTION, TAIL LIGHT | ||
| HEX. NUT | ||
| M 4 DIN 934-5 S FOR GROUND CONNECTION, TAIL LIGHT | ||
| 061 | A 1205460081 | CABLE COVER PLATE |
| FOR CABLE PROTECTIVE PLATE AT REAR CROSS MEMBER | ||
| LENS-HD. SHEET | ||
| METAL SCREW B 3,9X13 DIN 7981 FOR CABLE PROTECTIVE PLATE AT REAR CROSS MEMBER | ||
| A 1369950420 | FIXING CLAMP | |
| FOR CABLE HARNESS TO STEERING SPINDLE, TO STARTER MOTOR AND TO REVERSE DRIVE LIGHT AT FRONT WALL | ||
| 067 | A 0009974782 | HOSE PIECE, |
| DIA. 18X20-MM, 20-MM LONG OVER STARTER CABLE AND MAIN CABLE HARNESS ORDER BY THE METER | ||
| 071 | A 1805400950 | FUSE BOX |
| WITH FUSE AND BRASS SCREW | ||
| 072 | A 0005450203 | COVER |
| FUSE 12 AMP. | ||
| 8 DIN 72581 | ||
| FUSE 35 AMP. | ||
| 25 DIN 72581 | ||
| 074 | A 1215450540 | BRACKET, LOWER PART |
| FOR FUSE BOX | ||
| 075 | A 1215400573 | BRACKET, UPPER PART |
| FOR FUSE BOX | ||
| LENS-HD. SCREW | ||
| AM 6X12 DIN 7985-4 S FOR BRACKET AT BODY FRONT END | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR BRACKET AT BODY FRONT END | ||
| LENS-HD. SHEET | ||
| METAL SCREW BZ 3,9X19 DIN 7981 FOR BRACKET, UPPER PART, AT LOWER PART | ||
| A 0009941345 | SPRING NUT | |
| FOR BRACKET, UPPER PART, AT LOWER PART | ||
| X XXXXXXXXXXXX | PART NAME MISSING | |
| INSTRUMENTS AND SWITCHES | ||
| 080 | A 0005450611 | PUSH-PULL SWITCH |
| FOR INSTRUMENT LIGHTING | ||
| 081 | A 1205450072 | ESCUTCHEON |
| 082 | A 0009972040 | FELT RING |
| 82a | A 1205401283 | BUTTON |
| 083 | A 1105400058 | PULL SWITCH |
| FOR HEADLIGHTS, FOGLIGHTS, AND CLEARANCE LIGHTS | ||
| CABLE BRACKET | ||
| 5X0,3X135 N 286 FOR OAPILLARY TUBE AT HEATING HOSE | ||
| SEALING RING | ||
| A 14X18 DIN 7603 A1 FOR TELE-THERMOMETER | ||
| 084 | A 1215420401 | COMBI-INSTRUMENT WITH |
| KILOMETER GRADUATION, RATIO 0.875 | ||
| 084 | A 1215420401 | COMBI-INSTRUMENT WITH |
| KILOMETER GRADUATION, RATIO 0.875 SPECIAL REQUEST REAR AXLE RATIO 1:4.1 TIRES 6.4-15 | ||
| A 1215421101 | COMBI-INSTRUMENT WITH | |
| KILOMETER GRADUATION, RATIO 0.875 | ||
| A 1215420501 | COMBI-INSTRUMENT WITH | |
| MPH GRADUATION, RATIO 1.41 EXPORT, SPECIAL REQUEST | ||
| A 1215421201 | COMBI-INSTRUMENT WITH | |
| KILOMETER GRADUATION, RATIO 0.8075 EXPORT, SPECIAL REQUEST TIRES 6.40-15 | ||
| A 1215421301 | COMBI-INSTRUMENT WITH | |
| MPH GRADUATION, RATIO 1.3 EXPORT, SPECIAL REQUEST TIRES 6.40-15 | ||
| A 1215421401 | COMBI-INSTRUMENT WITH | |
| KILOMETER GRADUATION, RATIO 0.96 SPECIAL REQUEST REAR AXLE RATIO 1:4.10 TIRES 6.40-13 OR 6.70-13 | ||
| A 1215421501 | COMBI-INSTRUMENT WITH | |
| MPH GRADUATION, RATIO 1.54 SPECIAL REQUEST REAR AXLE RATIO 1:4.10 TIRES 6.40-13 OR 6.70-13 | ||
| 085 | A 0025421406 | KILOMETER COUNTER |
| A 0025422106 | MILEAGE COUNTER | |
| EXPORT, SPECIAL REQUEST | ||
| A 0025423406 | KILOMETER COUNTER | |
| SPECIAL REQUEST FOR TIRES 6.40-15 | ||
| A 0025423506 | MILEAGE COUNTER | |
| SPECIAL REQUEST FOR TIRES 6.40-15 | ||
| A 0025423606 | KILOMETER COUNTER | |
| SPECIAL REQUEST REAR AXLE RATIO 1:4.10 TIRES 6.40-13 OR 6.70-13 | ||
| A 0025423706 | MILEAGE COUNTER | |
| SPECIAL REQUEST REAR AXLE RATIO 1:4.10 TIRES 6.40-13 OR 6.70-13 | ||
| 086 | A 0005427102 | OIL PRESSURE GAUGE |
| 087 | A 0005428705 | PART NAME MISSING |
| (DEGREESC) | ||
| 088 | A 0005424403 | FUEL GAUGE |
| 089 | A 1209931710 | TENSION SPRING |
| FOR COMBI-INSTRUMENT FIXING | ||
| 090 | A 1205420280 | RUBBER FRAME |
| FOR COMBI-INSTRUMENT | ||
| 091 | A 0005450819 | LAMP SOCKET |
| BULB | ||
| H 12 V 2 W DIN 72601 | ||
| 100 | A 1205420611 | CLOCK |
| 101 | A 0005450719 | LAMP SOCKET |
| BULB | ||
| H 12 V 2 W DIN 72601 | ||
| 109 | A 0005450831 | DIMMER RESISTOR |
| FOR INSTRUMENT LIGHTING | ||
| A 0009883478 | CLIP | |
| FOR HOUSING, UPPER PART WITH LOWER PART, AT GLOVE BOX CASING | ||
| 113 | A 0005458724 | SWITCH |
| FOR TURN-INDICATOR AND DISTANCE BLINKER SYSTEM | ||
| A 0005459024 | REVERSING SWITCH | |
| FOR TURN-INDICATOR BLINKER SYSTEM SPECIAL REQUEST OMISSION OF DISTANCE BLINKER LIGHT SYSTEM | ||
| 114 | A 1805450437 | BLINKER LEVER KNOB, BLACK |
| A 1805450537 | BLINKER LEVER | |
| KNOB, IVORY COLOURED SPECIAL REQUEST | ||
| 116 | A 0005442332 | BLINKER TRANSMITTER |
| HEX. -HD. SCREW | ||
| M 6X12 DIN 933-8 G FOR BLINKER TRANSMITTER AT BRACKET FUSE BOX | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR BLINKER TRANSMITTER AT BRACKET FUSE BOX | ||
| A 0009902291 | GAGE CLIP WITH NUT | |
| FOR BLINKER TRANSMITTER AT BRACKET FUSE BOX | ||
| 122 | A 1805401360 | OIL PRESSURE GAUGE PIPE |
| FROM INSTRUMENT TO HOSE | ||
| A 1215400360 | OIL PRESSURE GAUGE PIPE | |
| FROM INSTRUMENT TO COUPLING PIECE | ||
| A 1285420047 | CONNECTING PIECE | |
| FOR OIL PRESSURE GAUGE PIPE | ||
| A 1215400460 | OIL PRESSURE GAUGE PIPE | |
| FROM CONNECTING PIECE TO HOSE | ||
| SPRING WASHER | ||
| A 8 DIN 137 FOR OIL PRESSURE GAUGE PIPE AND HOSE AT BRACKET | ||
| HEX. NUT | ||
| BM 8 DIN 439-5 S FOR OIL PRESSURE GAUGE PIPE AND HOSE AT BRACKET | ||
| 127 | A 0009870932 | RUBBER HOSE, 25 MM LONG |
| FOR OIL PRESSURE GAUGE PIPE AT BODY FRONT END ORDER BY THE METER | ||
| 128 | A 1369950501 | FIXING CLAMP |
| FOR OIL PRESSURE GAUGE PIPE AT BODY FRONT END | ||
| LENS-HD. SHEET | ||
| METAL SCREW BZ 3,9X9,5 DIN 7981 FOR OIL PRESSURE GAUGE PIPE AT BODY FRONT END | ||
| A 1819950020 | FIXING CLAMP | |
| FOR OIL PRESSURE GAUGE PIPE, CAPILLARY PIPE AND GLOW PLUG CABLE | ||
| LENS-HD. SHEET | ||
| METAL SCREW B 3,9X9,5 DIN 7981 FOR OIL PRESSURE GAUGE PIPE, CAPILLARY PIPE AND GLOW PLUG CABLE | ||
| 130 | A 1215400159 | HOSE |
| FOR OIL PRESSURE GAUGE PIPE | ||
| A 1215400259 | HOSE | |
| FOR OIL PRESSURE GAUGE PIPE | ||
| A 1869970681 | GROMMET | |
| FOR CAPILLARY PIPE CUT OF IF NECESSARY | ||
| 131 | A 0005452209 | STOP LIGHT SWITCH |
| SEE GROUP 42 | ||
| 132 | A 0005450412 | FOOT DIMMER SWITCH |
| 133 | A 1365450158 | INSULATING PLATE |
| FOR FOOT DIMMER SWITCH AT PEDAL FLOOR | ||
| LENS-HD. COUNTERSUNK | ||
| SCREW BM 4X30 DIN 7988-4 S FOR FOOT DIMMER SWITCH AT PEDAL FLOOR | ||
| 135 | A 0009902591 | CAGE CLIP WITH NUT |
| FOR FOOT DIMMER SWITCH AT PEDAL FLOOR | ||
| 136 | A 0009972781 | GROMMET |
| FOR CABLE TO FOOT DIMMER SWITCH | ||
| 137 | A 1205420307 | SPEEDOMETER CABLE, |
| 1.750-MM LONG | ||
| 139 | A 1209950001 | FIXING CLAMP, LEFT |
| FOR SPEEDOMETER CABLE AT BEARING, CONTROL SHAFT | ||
| LENS-HD. SCREW | ||
| AM 5X10 DIN 7985-4 S FOR SPEEDOMETER CABLE AT BEARING, CONTROL SHAFT | ||
| A 1209903140 | WASHER | |
| FOR SPEEDOMETER CABLE AT BEARING, CONTROL SHAFT | ||
| LOCK WASHER | ||
| B 5 DIN 127 FOR SPEEDOMETER CABLE AT BEARING, CONTROL SHAFT | ||
| A 0009883478 | CLIP | |
| FOR SPEEDOMETER CABLE AT PEDAL FLOOR | ||
| 141 | A 1809971281 | GROMMET |
| FOR SPEEDOMETER CABLE THROUGH FORK SUPPORT | ||
| 141 | A 1809971281 | GROMMET |
| FOR SPEEDOMETER CABLE THROUGH FORK SUPPORT | ||
| 142 | A 1809870044 | GROMMET |
| FOR LOCKING OF 3RD PASSAGE AT FORK SUPPORT | ||
| 150 | A 0015422020 | HORN |
| A 0005427120 | HORN | |
| SPECIAL REQUEST SIGNAL SYSTEM FOR CARS EXPORTED TO FRANCE | ||
| HEX. -HD. SCREW | ||
| M 10X28 DIN 931-8 G FOR HORN AT BRACKET | ||
| LOCK WASHER | ||
| B 10 DIN 127 FOR HORN AT BRACKET | ||
| HEX. NUT | ||
| M 10 DIN 934-5 S FOR HORN AT BRACKET | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR CABLE CONNECTION AT HORN | ||
| CYLINDER SCREW | ||
| AM 4X6 DIN 84-4 S FOR CABLE CONNECTION AT HORN | ||
| 151 | A 0001545506 | THREE-ELEMENT VOLTAGE |
| REGULATOR FOR GENERATOR SEE ALSO GROUP 15 | ||
| 152 | A 0001540250 | RUBBER BUSHING |
| LENS-HD. SCREW | ||
| AM 6X20 DIN 7985-4 S FOR GOVERNOR AT BRACKET, WHEEL ARCH PAN | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR GOVERNOR AT BRACKET, WHEEL ARCH PAN | ||
| 153 | A 1805400008 | CABLE HARNESS |
| FROM GENERATOR TO VOLTAGE REGULATOR | ||
| 154 | A 0009970781 | GROMMET |
| FOR CABLE FROM GENERATOR TO VOLTAGE REGULATOR | ||
| 155 | A 0005460235 | RUBBER PROTECTIVE CAP |
| FOR CABLE HARNESS AT GENERATOR | ||
| 156 | A 1819950020 | PIPE |
| FOR CABLE HARNESS AT GENERATOR | ||
| A 1215401709 | AUXILIARY CABLE HARNESS | |
| SPECIAL REQUEST FOG LIGHT FOR CARS EXPORTED TO THE USA | ||
| A 0005450301 | FUSE BOX, 2-POLE | |
| SPECIAL REQUEST FOG LIGHT FOR CARS EXPORTED TO THE USA | ||
| CYLINDER SCREW | ||
| AM 4X15 DIN 84-4 S FOR FUSE BOX AT FRESH-AIR DUCT, LEFT SPECIAL REQUEST FOG LIGHT FOR CARS EXPORTED TO THE USA | ||
| A 0005422719 | CONTACTOR, 12 VOLT | |
| SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO AUSTRIA AND PORTUGAL | ||
| ELECTRIC CABLE, | ||
| 80-MM LONG B 1 DIN 72551 SW FROM RELAY, TERMINAL 30, TO REALY, TERMINAL 86 SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CAR | ||
| CABLE TERMINAL | ||
| 4X0,8 N 261 SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO AUSTRIA AND PORTUGAL | ||
| A 0009970181 | GROMMET | |
| SPECIAL REQUEST BLINKER SIGNAL SYSTEM FOR CARS EXPORTED TO AUSTRIA AND PORTUGAL | ||
| X XXXXXXXXXXXX | PART NAME MISSING | |
| GLOW STARTING SWITCH | ||
| 160 | A 0005451317 | GLOW STARTING SWITCH |
| WIRE CABLE | ||
| SEE GROUP 30 | ||
| PIN WITH HEAD | ||
| 4 F8X16X13,7 DIN 1434 FOR WIRE CABLE AT GLOW STARTING SWITCH | ||
| COTTER PIN | ||
| 1X8 DIN 94 ST FOR WIRE CABLE AT GLOW STARTING SWITCH | ||
| 163 | A 1215400173 | BRACKET |
| FOR WIRE CABLE | ||
| 164 | A 1215450022 | LEVER |
| FOR GLOW STARTING SWITCH | ||
| 165 | A 1105400383 | BUTTON |
| A 0009883478 | CLIP | |
| FOR FIXING OF CABLE AT BRACKET | ||
| CYLINDER SCREW | ||
| AM 4X15 DIN 84-4 S FOR FIXING OF WIRE CABLE AT BRACKET | ||
| WASHER | ||
| B 4,3 DIN 9021 FOR FIXING OF WIRE CABLE AT BRACKET | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR FIXING OF WIRE CABLE AT BRACKET | ||
| HEX. NUT | ||
| M 4 DIN 934-5 S FOR FIXING OF WIRE CABLE AT BRACKET | ||
| PIN WITH HEAD | ||
| 4 F8X25X22,7 DIN 1434 FOR FIXING OF LEVER AT BRACKET | ||
| WASHER | ||
| 4,3 DIN 125 FOR FIXING OF LEVER AT BRACKET | ||
| COTTER PIN | ||
| 1X8 DIN 94 ST FOR FIXING OF LEVER AT BRACKET | ||
| 175 | A 1215400557 | GLOW STARTING |
| SWITCH WITHOUT WIRE CABLE | ||
| 176 | A 1365450217 | GLOW STARTING SWITCH |
| A 0009902251 | OCTAGONAL NUT | |
| 177 | A 1205401183 | SWITCH HANDLE |
| FOR GLOW STARTING SWITCH | ||
| 178 | A 1215400084 | LEVER |
| FOR WIRE CABLE OPERATION | ||
| TOOTHED WASHER | ||
| J 6,4 DIN 6797 FOR FIXING PIN | ||
| 179 | A 1205450076 | WASHER |
| FOR FIXING PIN | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR FIXING PIN | ||
| HEX. NUT | ||
| M 6 DIN 934-5 S FOR FIXING PIN | ||
| 180 | A 1919930101 | PRESSURE SPRING |
| FOR GUIDE SLEEVE, STOP SPRING | ||
| BALL | ||
| 6 MM III DIN 5401 FOR GUIDE SLEEVE, STOP SPRING | ||
| HEX. -HD. SCREW | ||
| M 5X28 DIN 931-8 G FOR LEVER AT SHIFTING SHAFT | ||
| WASHER | ||
| 5,3 DIN 433 FOR LEVER AT SHIFTING SHAFT | ||
| HEX. NUT | ||
| M 5 DIN 934-5 S FOR LEVER AT SHIFTING SHAFT | ||
| CYLINDER PIN | ||
| 4 M6X16 DIN 7 FOR SHIFTING SHAFT AT GLOW STARTING SWITCH | ||
| HEX. -HD. SCREW | ||
| M 5X15 DIN 933-8 G FOR WIRE CABLE AT GLOW STARTING SWITCH | ||
| 181 | A 1365450052 | SPACER RING |
| FOR WIRE CABLE AT GLOW STARTING SWITCH | ||
| WASHER | ||
| 5,3 DIN 433 FOR WIRE CABLE AT GLOW STARTING SWITCH | ||
| LOCK WASHER | ||
| B 5 DIN 127 FOR WIRE CABLE AT GLOW STARTING SWITCH | ||
| HEX. NUT | ||
| M 5 DIN 934-5 S FOR WIRE CABLE AT GLOW STARTING SWITCH | ||
| WASHER | ||
| 5,3 DIN 433 FOR WIRE CABLE AT GLOW STARTING SWITCH | ||
| COTTER PIN | ||
| 1,5X12 DIN 94 ST FOR WIRE CABLE AT GLOW STARTING SWITCH | ||
| 190 | A 0009972481 | GROMMET |
| 191 | A 1219950535 | FIXING CLAMP |
| CYLINDER SCREW | ||
| AM 5X12 DIN 84-4 S FOR WIRE CABLE AT ANGLE, INJECTION PUMP | ||
| LOCK WASHER | ||
| B 5 DIN 127 FOR WIRE CABLE AT ANGLE, INJECTION PUMP | ||
| HEX. NUT | ||
| M 5 DIN 934-5 S FOR WIRE CABLE AT ANGLE, INJECTION PUMP | ||
| HEX. -HD. SCREW | ||
| M 6X15 DIN 933-8 G FOR BRACKET, GLOW STARTING SWITCH, AT GLOVE BOX, BOTTOM | ||
| WASHER | ||
| A 6,4 DIN 9021 FOR BRACKET, GLOW STARTING SWITCH, AT GLOVE BOX, BOTTOM | ||
| WASHER | ||
| 6,4 DIN 433 FOR BRACKET, GLOW STARTING SWITCH, AT GLOVE BOX, BOTTOM | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR BRACKET, GLOW STARTING SWITCH, AT GLOVE BOX, BOTTOM | ||
| 195 | A 1209931510 | RELEASE SPRING |
| A 0009883378 | CLIP | |
| FOR WIRE CABLE AT INSTRUMENT PANEL | ||
| A 0009872140 | RUBBER WASHER | |
| ABOVE WIRE CABLE GLOW STARTING SWITCH | ||
| A 0009870244 | GROMMET | |
| FOR LOCKING OF BORE, WIRE CABLE, THROUGH PEDAL FLOOR | ||
| 196 | A 0005451920 | GLOW CONTROL |
| OPTIONAL | ||
| A 0005452420 | GLOW CONTROL | |
| OPTIONAL | ||
| 197 | A 0005453218 | RESISTOR |
| OPTIONAL | ||
| A 0005452218 | GLOW PLUG RESISTOR | |
| OPTIONAL | ||
| 200 | A 0005450525 | SOCKET WITHOUT HAND LIGHT |
| SPECIAL REQUEST | ||
| ELECTRIC CABLE, | ||
| 1000-MM LONG A 1 DIN 72551 SW ORDER BY THE METER SPECIAL REQUEST | ||
| INSULATING HOSE, | ||
| 950-MM LONG B 3X3,8 SW DIN 40621 ORDER BY THE METER SPECIAL REQUEST | ||
| 201 | A 1205451195 | BRACKET |
| FOR SOCKET SPECIAL REQUEST SOCKET FOR HAND LIGHT | ||
| CYLINDER SCREW | ||
| AM 5X10 DIN 84-4 S FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST SOCKET FOR HAND LIGHT | ||
| LOCK WASHER | ||
| B 5 DIN 127 FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST SOCKET FOR HAND LIGHT | ||
| HEX. NUT | ||
| M 5 DIN 934-5 S FOR BRACKET AT WHEEL ARCH PAN, LEFT SPECIAL REQUEST SOCKET FOR HAND LIGHT |
© 2010-2013 UAB "RPV" Paslaugų teikimo sąlygos - Privatumo politika - Kopijuoti ir naudoti komerciniais tikslais draudžiama