automobilių detalių žinynas
 | Viso detalių : 0 |
Mano miestas
Pagrindinis meniu
Transporto priemonė: TYP 180D BM 120.110-.111, .100-.102; VIN numerio dalis: 120100
Grupė: 54 ELECTRICAL EQUIPMENT AND INSTRUMENTS
| # | Kodas | Pavadinimas |
|---|---|---|
| X XXXXXXXXXXXX | PART NAME MISSING | |
| BATTERY AND STARTER CABLE | ||
| 001 | A 0005414801 | LEAD BATTERY 12 V 84 AH |
| A 0005411501 | PART NAME MISSING | |
| A 0005412901 | BATTERY 12 V 84 AH | |
| WITH MIPOR SEPARATOR | ||
| A 0005412101 | BATTERY 12 V 84 AH | |
| WITH MIPOR SEPARATOR SPECIAL REQUEST TROPICAL DESIGN | ||
| A 0005416001 | SPECIAL COLD | |
| START BATTERY 12 V 84 AH SPECIAL REQUEST FOR REGIONS WITH LOW TEMPERATURES | ||
| 002 | A 1205400323 | MOUNTING FRAME |
| 003 | A 1205410124 | TIGHTENING SCREW |
| FOR BATTERY MOUNTING | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR BATTERY MOUNTING | ||
| HEX. NUT | ||
| M 6 DIN 934-5 S FOR BATTERY MOUNTING | ||
| A 1809971582 | INSULATING HOSE, | |
| 20-MM LONG OVER ANGLE OF SUPPORTING RAIL, BATTERY ORDER BY THE METER | ||
| 004 | A 0009870315 | RUBBER PLUG |
| FOR BLIND HOLE IN FRONT WALL | ||
| 006 | A 1205400230 | STARTER CABLE |
| FROM POS. POLE BATTERY TO STARTER MOTOR | ||
| A 1205400330 | STARTER CABLE | |
| FROM POS. POLE BATTERY TO STARTER MOTOR | ||
| A 1365460035 | RUBBER PROTECTIVE CAP | |
| FOR STARTER CABLE | ||
| 007 | A 1115460035 | RUBBER PROTECTIVE CAP |
| FOR STARTER CABLE | ||
| A 1839970181 | PART NAME MISSING | |
| A 1869970481 | PART NAME MISSING | |
| A 1819970181 | GROMMET | |
| FOR STARTER CABLE THROUGH FIXING ANGLE, FRONT WALL | ||
| 008 | A 0009973481 | GROMMET |
| FOR STARTER CABLE THROUGH FIXING ANGLE, FRONT WALL | ||
| 009 | A 1205400631 | GROUND CABLE |
| FROM NEG. POLE BATTERY TO COUPLING FLANGE | ||
| A 1205400431 | GROUND CABLE | |
| FROM NEG. POLE BATTERY TO COUPLING FLANGE | ||
| X XXXXXXXXXXXX | PART NAME MISSING | |
| CABLES | ||
| A 1205400905 | PART NAME MISSING | |
| A 1205400205 | PART NAME MISSING | |
| A 1205401305 | MAIN CABLE HARNESS | |
| WHEN MOUNTING THE ALTERED WIPER MOTOR, 2 CABLES NO. 65 AND 66 IN MAIN CABLE HARNESS ARE OMITTED | ||
| A 1205402005 | MAIN CABLE HARNESS | |
| WHEN MOUNTING THE ALTERED WIPER MOTOR, 2 CABLES NO. 65 AND 66 IN MAIN CABLE HARNESS ARE OMITTED UP TO CHASSIS 6519774 | ||
| 015 | A 1205402205 | MAIN CABLE HARNESS |
| FOR GENERATOR WITH SEPARATED GOVERNOR WHEN MOUNTING THE ALTERED WIPER MOTOR, 2 CABLES NO. 65 AND 66 IN MAIN CABLE HARNES | ||
| A 1205401005 | REPLACED BY 120 540 21 05 | |
| WHEN MOUNTING THE ALTERED WIPER MOTOR, 2 CABLES NO. 65 AND 66 IN MAIN CABLE HARNESS ARE OMITTED | ||
| A 1205400405 | REPLACED BY 120 540 21 05 | |
| WHEN MOUNTING THE ALTERED WIPER MOTOR, 2 CABLES NO. 65 AND 66 IN MAIN CABLE HARNESS ARE OMITTED | ||
| A 1205401505 | MAIN CABLE HARNESS | |
| WHEN MOUNTING THE ALTERED WIPER MOTOR, 2 CABLES NO. 65 AND 66 IN MAIN CABLE HARNESS ARE OMITTED | ||
| A 1205402105 | MAIN CABLE HARNESS | |
| WHEN MOUNTING THE ALTERED WIPER MOTOR, 2 CABLES NO. 65 AND 66 IN MAIN CABLE HARNESS ARE OMITTED FROM CHASSIS 6519774 | ||
| A 1205402305 | MAIN CABLE HARNESS | |
| FOR GENERATOR WITH SEPARATED GOVERNOR WHEN MOUNTING THE ALTERED WIPER MOTOR, 2 CABLES NO. 65 AND 66 IN MAIN CABLE HARNES | ||
| 016 | A 0005450628 | HOUSING, LOWER |
| PART, WITH SOCKET | ||
| 017 | A 0005450080 | GASKET |
| BETWEEN HOUSING, UPPER AND LOWER PART | ||
| A 0009883478 | FIXING CLIP | |
| FOR HOUSING, UPPER PART WITH LOWER PART TO GLOVE COMPARTMENT | ||
| 018 | A 1205400138 | ELECTRIC CABLE |
| FROM GLOW PLUG RESISTOR TO GLOW PLUG | ||
| A 1205400238 | ELECTRIC CABLE | |
| FOR MASTER CYLINDER WITH COMBINED REFILLING TANK FROM GLOW PLUG RESISTOR TO GLOW PLUG UP TO CHASSIS 4512545 | ||
| A 1205401338 | ELECTRIC CABLE | |
| FOR MASTER CYLINDER WITH SEPARATED REFILLING TANK FROM GLOW PLUG RESISTOR TO GLOW PLUG FROM CHASSIS 4512546 | ||
| A 1205400007 | PART NAME MISSING | |
| A 1215400107 | PART NAME MISSING | |
| UP TO CHASSIS 7513321 | ||
| A 1205400107 | PART NAME MISSING | |
| UP TO CHASSIS 7513321 | ||
| A 1215400207 | PART NAME MISSING | |
| UP TO CHASSIS 7513321 | ||
| 020 | A 1215400807 | PART NAME MISSING |
| FROM CHASSIS 7513322 | ||
| 026 | A 1205400041 | GROUND CABLE |
| FROM ENGINE TO FRONT WALL | ||
| HEX. NUT | ||
| M 10 DIN 936-5 S FOR GROUND CABLE TO CLUTCH HOUSING FLANGE | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR GROUND CABLE TO PEDAL FLOOR UP TO CHASSIS 5516684 | ||
| HEX. -HD. SCREW | ||
| M 6X12 DIN 933-8 G FOR GROUND CABLE TO PEDAL FLOOR UP TO CHASSIS 5516684 | ||
| 027 | A 1204200227 | SCREW WITH LOCKING PLATE |
| FOR GROUND CABLE TO PEDAL FLOOR FROM CHASSIS 5516685 | ||
| HEX. NUT | ||
| M 6 DIN 934-5 S FOR GROUND CABLE TO PEDAL FLOOR FROM CHASSIS 5516685 | ||
| A 1819950020 | FIXING CLAMP | |
| FOR STEERING SPINDLE CABLE HARNESS TO FORKED MEMBER | ||
| LENS-HD. SHEET | ||
| METAL SCREW B 3,9X9,5 DIN 7981 FOR STEERING SPINDLE CABLE HARNESS TO FORKED MEMBER | ||
| 028 | A 1205400038 | GROUND CABLE |
| FROM STEERING SPINDLE CABLE HARNESS TO STRUT IN WHEEL ARCH FOR DOUBLE-JOINT REAR AXLE UP TO CHASSIS 5514467 | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR GROUND CABLE TO WHEEL ARCH STRUT FOR DOUBLE-JOINT REAR AXLE UP TO CHASSIS 5514467 | ||
| LENS-HD. SCREW | ||
| AM 4X12 DIN 7985- 4S FOR GROUND CABLE TO WHEEL ARCH STRUT FOR DOUBLE-JOINT REAR AXLE UP TO CHASSIS 5514467 | ||
| INSULATING HOSE, | ||
| 200-MM LONG B 16X18 SW DIN 40621 FOR MAIN CABLE HARNESS, LIGHT ROTARY SWITCH ORDER BY THE METER | ||
| A 0005461741 | CABLE CONNECTOR, 6-POLES | |
| FOR TAILLIGHT CABLE HARNESS UP TO CHASSIS 6519774 | ||
| 031 | A 0005461941 | CABLE CONNECTOR, 5-POLES |
| FOR TAILLIGHT CABLE HARNESS UP TO CHASSIS 4507993 | ||
| 031 | A 0005461941 | CABLE CONNECTOR, 5-POLES |
| FOR TAILLIGHT CABLE HARNESS FROM CHASSIS 6519775 | ||
| 032 | A 0005460641 | CABLE CONNECTOR, 5-POLES |
| FOR STEERING SPINDLE HARNESS FROM CHASSIS 4507994 | ||
| 033 | A 0005461841 | CABLE CONNECTOR, 2-POLES |
| FOR HEATING BLOWER CONNECTION | ||
| 033 | A 0005461841 | CABLE CONNECTOR, 2-POLES |
| FOR BLINKER LIGHT, REAR UP TO CHASSIS 6519774 | ||
| LENS-HD. SHEET | ||
| METAL SCREW B 3,9X19 DIN 7981 FOR CABLE CONNECTOR, 5-POLES, TO WHEEL ARCH PAN | ||
| LENS-HD. SHEET | ||
| METAL SCREW BZ 3,9X9,5 DIN 7981 FOR CABLE CONNECTOR TO FRONT WALL | ||
| LENS-HD. SHEET | ||
| METAL SCREW B 3,9X13 DIN 7981 FOR CABLE CONNECTOR TO REINFORCEMENT BRACKET, LEFT AND RIGHT | ||
| A 1819950020 | FIXING CLAMP | |
| FOR CABLE HARNESS TO GENERATOR | ||
| LENS-HD. SHEET | ||
| METAL SCREW B 3,9X9,5 DIN 7981 FOR CABLE HARNESS TO GENERATOR | ||
| WASHER | ||
| 4,3 DIN 125 FOR CABLE HARNESS TO GENERATOR | ||
| A 1819950020 | FIXING CLAMP | |
| FOR MAIN CABLE HARNESS TO REVERSE DRIVE LIGHT SWITCH TO PEDAL FLOOR, RIGHT FROM CHASSIS 5516685 | ||
| A 0009888878 | FIXING CLIP | |
| FOR MAIN CABLE HARNESS TO REVERSE DRIVE LIGHT SWITCH TO PEDAL FLOOR, RIGHT FROM CHASSIS 5516685 | ||
| LENS-HD. SHEET | ||
| METAL SCREW BZ 4,8X9,5 DIN 7981 FOR MAIN CABLE HARNESS TO REVERSE DRIVE LIGHT SWITCH TO PEDAL FLOOR, RIGHT FROM CHASSIS | ||
| LENS-HD. SCREW | ||
| AM 5X10 DIN 7985- 4S FOR MAIN CABLE HARNESS TO REVERSE DRIVE LIGHT SWITCH TO PEDAL FLOOR, RIGHT FROM CHASSIS 5516685 | ||
| LOCK WASHER | ||
| B 5 DIN 127 FOR MAIN CABLE HARNESS TO REVERSE DRIVE LIGHT SWITCH TO PEDAL FLOOR, RIGHT FROM CHASSIS 5516685 | ||
| A 1205401738 | CABLE HARNESS | |
| FROM 2-POLES CABLE CONNECTOR TO REVERSE DRIVE LIGHT | ||
| 034 | A 1805403138 | CABLE HARNESS |
| FROM 2-POLES CABLE CONNECTOR TO REVERSE DRIVE LIGHT FROM CHASSIS 5519057 | ||
| A 1869950220 | FIXING CLAMP | |
| FROM CHASSIS 5519057 | ||
| 035 | A 1805460043 | BRACKET |
| FRO CABLE HARNESS TO REVERSE DRIVE LIGHT SWITCH FROM CHASSIS 5519057 | ||
| 036 | A 1805460143 | BRACKET |
| FRO CABLE HARNESS TO REVERSE DRIVE LIGHT SWITCH FROM CHASSIS 5519057 | ||
| 36a | A 0009973181 | GROMMET |
| AT BRACKET FOR CABLE HARNESS FROM CHASSIS 5519057 | ||
| A 1869970781 | GROMMET | |
| FOR MAIN CABLE HARNESS TO FRONT WALL | ||
| 037 | A 1819970081 | GROMMET |
| FOR MAIN CABLE HARNESS TO FRONT WALL | ||
| 038 | A 0009972781 | GROMMET |
| FOR MAIN CABLE HARNESS TO FRONT WALL | ||
| 38a | A 0009972281 | GROMMET |
| FOR CABLE TO BLINKER LIGHT THROUGH WHEEL ARCH | ||
| 039 | A 0009883378 | FIXING CLIP |
| FOR MAIN CABLE HARNESS AT FRONT WALL | ||
| 039 | A 0009883378 | FIXING CLIP |
| FOR MAIN CABLE HARNESS AT FRONT WALL | ||
| 040 | A 0009883478 | FIXING CLIP |
| FOR MAIN CABLE HARNESS AT FRONT WALL | ||
| 040 | A 0009883478 | FIXING CLIP |
| FOR MAIN CABLE HARNESS AT FRONT WALL | ||
| A 0009971781 | GROMMET | |
| FOR FUEL TRANSMITTER CABLE | ||
| 042 | A 0009971881 | GROMMET |
| FOR FUEL TRANSMITTER CABLE | ||
| A 0009972281 | GROMMET | |
| FOR LUGGAGE COMPARTMENT COVER, INNER PLATE UP TO CHASSIS 7513321 | ||
| A 0009972781 | GROMMET | |
| FOR REAR SEAT SUPPORT | ||
| A 0009973081 | GROMMET | |
| FOR REAR SEAT SUPPORT UP TO CHASSIS 7503757 | ||
| A 0009973081 | GROMMET | |
| FOR MAIN CABLE HARNESS THROUGH GLOVE BOX | ||
| A 0009883378 | FIXING CLIP | |
| FOR TAILLIGHT CABLE HARNESS TO COVER PLATE | ||
| A 0009883478 | FIXING CLIP | |
| FOR TAILLIGHT CABLE HARNESS TO COVER PLATE | ||
| A 1869950220 | FIXING CLAMP | |
| FOR TRANSMITTER CABLE FOR TAILLIGHT CABLE HARNESS TO COVER PLATE UP TO CHASSIS 7513321 | ||
| LENS-HD. SCREW | ||
| AM 5X10 DIN 7985- 4S FOR TAILLIGHT CABLE HARNESS TO COVER PLATE UP TO CHASSIS 7513321 | ||
| LOCK WASHER | ||
| B 5 DIN 127 FOR TAILLIGHT CABLE HARNESS TO COVER PLATE UP TO CHASSIS 7513321 | ||
| LENS-HD. SHEET | ||
| METAL SCREW B 4,8X9,5 DIN 7981 FOR GROUND CABLE TRANSMITTER TO REAR CROSS MEMBER FROM CHASSIS 7513322 | ||
| FIXING CLAMP | ||
| 1X8 DIN 72571 FOR TAILLIGHT CABLE HARNESS TO COVER PLATE UP TO CHASSIS 7513321 | ||
| LENS-HD. SCREW | ||
| AM 4X10 DIN 7985- 4S FOR TAILLIGHT CABLE HARNESS TO COVER PLATE UP TO CHASSIS 7513321 | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR TAILLIGHT CABLE HARNESS TO COVER PLATE UP TO CHASSIS 7513321 | ||
| HEX. NUT | ||
| M 4 DIN 934-5 S FOR TAILLIGHT CABLE HARNESS TO COVER PLATE UP TO CHASSIS 7513321 | ||
| 056 | A 1205460182 | FIXING SHACKLE |
| FOR TAILLIGHT CABLE, LEFT AND RIGHT IS MOUNTED WITH FENDER AND WHEEL ARCH | ||
| LENS-HD. SCREW | ||
| AM 4X10 DIN 7985- 4S FOR GROUND CONNECTION, TAILLIGHT | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR GROUND CONNECTION, TAILLIGHT | ||
| HEX. NUT | ||
| M 4 DIN 934-5 S FOR GROUND CONNECTION, TAILLIGHT | ||
| A 0009881778 | FIXING CLIP | |
| FOR CABLE TO LICENCE PLATE LIGHT TO LUGGAGE COMPARTMENT COVER UP TO CHASSIS 7513321 | ||
| A 1869950220 | FIXING CLAMP | |
| FOR CABLE TO LICENCE PLATE LIGHT TO LUGGAGE COMPARTMENT COVER UP TO CHASSIS 7513321 | ||
| 061 | A 1205460081 | CABLE COVER PLATE |
| FOR CABLE PROTECTIVE PLATE TO REAR CROSS MEMBER | ||
| LENS-HD. SHEET | ||
| METAL SCREW B 3,9X13 DIN 7981 FOR CABLE PROTECTIVE PLATE TO REAR CROSS MEMBER | ||
| 062 | A 1369950420 | FIXING CLAMP |
| FOR CABLE HARNESS TO STEERING SPINDLE, TO STARTER MOTOR AND REVERSE DRIVE LIGHT TO FRONT WALL | ||
| A 1369950420 | FIXING CLAMP | |
| FOR MAIN CABLE HARNESS TO FRONT WALL | ||
| 063 | A 1369950037 | FIXING CLAMP |
| FOR MAIN CABLE HARNESS TO FRONT WALL | ||
| LENS-HD. SCREW | ||
| AM 4X12 DIN 7985- 4S FOR MAIN CABLE HARNESS TO FRONT WALL | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR MAIN CABLE HARNESS TO FRONT WALL | ||
| 066 | A 0009902291 | CAGE CLIP WITH NUT |
| FOR MAIN CABLE HARNESS TO FRONT WALL | ||
| LENS-HD. SCREW | ||
| AM 6X15 DIN 7985- 4S FOR MAIN CABLE HARNESS TO FRONT WALL | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR MAIN CABLE HARNESS TO FRONT WALL | ||
| A 1209970882 | PART NAME MISSING | |
| A 1809971582 | HOSE PIECE, | |
| 18X20X20-MM LONG OVER STARTER CABLE AND AMIN CABLE HARNESS | ||
| 067 | A 0009974782 | HOSE PIECE, |
| 18X20X20-MM LONG OVER STARTER CABLE AND AMIN CABLE HARNESS ORDER BY THE METER | ||
| 068 | A 1369950135 | FIXING CLAMP |
| FOR MAIN CABLE BARNESS TO FRONT WALL | ||
| A 1879950037 | FIXING CLAMP | |
| FOR STEERING CABLE HARNESS TO BODY FRONT END UP TO CHASSIS 4510455 | ||
| LENS-HD. SCREW | ||
| AM 6X12 DIN 7985-4S FOR STEERING CABLE HARNESS TO BODY FRONT END UP TO CHASSIS 4510455 | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR STEERING CABLE HARNESS TO BODY FRONT END UP TO CHASSIS 4510455 | ||
| WASHER | ||
| 4,3 DIN 125 FOR STEERING CABLE HARNESS TO BODY FRONT END UP TO CHASSIS 4510455 | ||
| A 1205400050 | PART NAME MISSING | |
| A 1205400350 | PART NAME MISSING | |
| A 1205400650 | FUSE BOX WITHOUT FUSE | |
| 071 | A 1205400450 | FUSE BOX WITHOUT FUSE |
| A 0005450303 | COVER | |
| 072 | A 0005450903 | COVER |
| FUSE, 12 AMP. | ||
| 8 DIN 72581 | ||
| FUSE, 35 AMP. | ||
| 25 DIN 72581 | ||
| 074 | A 1205451395 | BRACKET, FUSE BOX |
| 076 | A 0009941345 | SPRING NUT |
| FOR FUSE BOX TO BRACKET | ||
| LENS-HD. SHEET | ||
| METAL SCREW BZ 3,9X19 DIN 7981 FOR FUSE BOX TO BRACKET | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR BRACKET TO BODY FRONT END | ||
| LENS-HD. SCREW | ||
| AM 6X12 DIN 7985- 4S FOR BRACKET TO BODY FRONT END | ||
| A 1819950020 | FIXING CLAMP | |
| FOR MAIN CABLE HARNESS TO REINFORCEMENT BRACKET, LEFT AND RIGHT | ||
| LENS-HD. SCREW | ||
| AM 4X10 DIN 7985- 4S FOR MAIN CABLE HARNESS TO REINFORCEMENT BRACKET, LEFT AND RIGHT | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR MAIN CABLE HARNESS TO REINFORCEMENT BRACKET, LEFT AND RIGHT | ||
| A 1805403038 | GROUND CABLE | |
| FOR PARKING LIGHT WITH ASYMMETRICAL DIMMER LIGHT FROM CHASSIS 7516125 | ||
| A 1209950122 | FIXING CLAMP | |
| FOR MAIN CABLE HARNESS TO FRAME CROSS MEMBER, FRONT | ||
| 077 | A 1219950022 | FIXING CLAMP |
| FOR MAIN CABLE HARNESS TO FRAME CROSS MEMBER, FRONT | ||
| HEX. -HD. | ||
| SHEET METAL SCREW B 6,3X16 DIN 7976 FOR MAIN CABLE HARNESS TO FRAME CROSS MEMBER, FRONT | ||
| 078 | A 1539950322 | FIXING CLAMP |
| FOR CABLE MOUNTING, FOOT DIMMER SWITCH AND GROUND CONNECTION | ||
| LENS-HD. SHEET | ||
| METAL SCREW BZ 4,8X9,5 DIN 7981 FOR CABLE MOUNTING, FOOT DIMMER SWITCH AND GROUND CONNECTION | ||
| X XXXXXXXXXXXX | PART NAME MISSING | |
| INSTRUMENTS AND SWITCHES | ||
| A 1205400044 | PUSH-PULL SWITCH | |
| FOR INSTRUMENT LIGHTING | ||
| 080 | A 0005450611 | PUSH-PULL SWITCH |
| FOR INSTRUMENT LIGHTING | ||
| 081 | A 1205450072 | ESCUTCHEON |
| 082 | A 0009972040 | FELT RING |
| 083 | A 1205450237 | BUTTON |
| A 1209950005 | FIXING CLAMP | |
| FOR CAPILLARY TUBE TO FRONT WALL OR HEATING HOSE RESP. | ||
| LENS-HD. SHEET | ||
| METAL SCREW B 3,9X9,5 DIN 7981 FOR CAPILLARY TUBE TO FRONT WALL OR HEATING HOSE RESP. | ||
| CABLE BRACKET | ||
| 5X0,3X135 N 286 FOR CAPILLARY TUBE TO HEATING HOSE | ||
| SEALING RING | ||
| A 14X18 DIN 7603 A1 FOR TELE-THERMOMETER | ||
| A 1205420301 | PART NAME MISSING | |
| A 1205420701 | COMBI-INSTRUMENT | |
| WITH KILOMETER GRADUATION | ||
| 084 | A 1205422801 | COMBI-INSTRUMENT |
| WITH KILOMETER GRADUATION | ||
| A 1205421101 | COMBI-INSTRUMENT | |
| WITH KILOMETER GRADUATION | ||
| A 1205422301 | COMBI-INSTRUMENT | |
| WITH KILOMETER GRADUATION TIRES 6.40-15 RATIO 1:3.7 | ||
| A 1205422201 | COMBI-INSTRUMENT | |
| WITH M. P. H. GRADUATION TIRES 6,40-15 RATIO 1:3.7 | ||
| A 1205420801 | COMBI-INSTRUMENT | |
| WITH M. P. H. GRADUATION EXPORT TROPICAL DESIGN TIRES 6.40-13 RATIO 1:3.7 | ||
| A 1205421901 | COMBI-INSTRUMENT | |
| WITH M. P. H. GRADUATION EXPORT, SPECIAL REQUEST TIRES 6.40-13 RATIO 1:4.1 | ||
| A 1205422101 | COMBI-INSTRUMENT WITH | |
| KILOMETER GRADUATION EXPORT, SPECIAL REQUEST TIRES 6.40-13 RATIO 1:4.1 | ||
| A 0005426706 | PART NAME MISSING | |
| A 0005427206 | KILOMETER COUNTER | |
| 085 | A 0005427406 | KILOMETER COUNTER |
| FOR COMBI-INSTRUMENT 120 542 28 01/11 01 | ||
| A 0005427106 | MILES COUNTER | |
| FOR COMBI-INSTRUMENT 120 542 08 01 | ||
| A 0005429306 | MILES COUNTER | |
| FOR COMBI-INSTRUMENT 120 542 19 01 | ||
| A 0005429606 | KILOMETER COUNTER | |
| FOR COMBI-INSTRUMENT 120 542 21 01 | ||
| A 0005429506 | KILOMETER COUNTER | |
| FOR COMBI-INSTRUMENT 120 542 23 01 | ||
| A 0015429706 | MILES COUNTER | |
| FOR COMBI-INSTRUMENT 120 542 22 01 | ||
| A 0005424302 | PART NAME MISSING | |
| A 0005424402 | OIL PRESSURE GAUGE | |
| 086 | A 0005427102 | OIL PRESSURE GAUGE |
| A 0005428305 | TELE-THERMOMETER | |
| 087 | A 0005428705 | TELE-THERMOMETER |
| A 0005422903 | PART NAME MISSING | |
| A 0005423003 | FUEL GAUGE | |
| 088 | A 0005424403 | FUEL GAUGE |
| A 1209931410 | TENSION SPRING | |
| FOR COMBI-INSTRUMENT | ||
| 089 | A 1209931710 | TENSION SPRING |
| FOR COMBI-INSTRUMENT | ||
| A 1205420180 | RUBBER FRAME | |
| FOR COMBI-INSTRUMENT | ||
| 090 | A 1205420280 | RUBBER FRAME |
| FOR COMBI-INSTRUMENT | ||
| A 1209970782 | RUBBER HOSE, 30 MM LONG | |
| FOR BRACKET, COMBI-INSTRUMENT | ||
| A 1835450019 | LAMP SOCKET | |
| 091 | A 0005450719 | LAMP SOCKET |
| BULB | ||
| H 12 V 2 W DIN 72601 | ||
| A 1205420011 | CLOCK, MECHANICAL | |
| 100 | A 1205420311 | CLOCK, MECHANICAL |
| A 1835450019 | LAMP SOCKET | |
| A 0005450719 | LAMP SOCKET | |
| BULB | ||
| H 12 V 2 W DIN 72601 | ||
| A 0005450331 | DIMMER RESISTOR | |
| FOR INSTRUMENT LIGHTING | ||
| 109 | A 0005450831 | DIMMER RESISTOR |
| FOR INSTRUMENT LIGHTING FROM CHASSIS 4500038 | ||
| 113 | A 0005450124 | RELEASE SWITCH |
| FOR TURN INDICATOR BLINKER LIGHT | ||
| A 1805450237 | BLINKER LEVER KNOB, BLACK | |
| 114 | A 1805450437 | BLINKER LEVER KNOB, BLACK |
| A 1805401609 | ADDITIONAL CABLE HARNESS | |
| A 0005453824 | DISTANCE LIGHT | |
| BLINKER SWITCH, BLACK SPECIAL REQUEST, DISTANCE LIGHT BLINKER SYSTEM | ||
| A 0005442332 | BLINKER TRANSMITTER | |
| SPECIAL REQUEST DISTANCE LIGHT BLINKER SYSTEM | ||
| A 1205450140 | BRACKET | |
| FOR BLINKER TRANSMITTER SPECIAL REQUEST DISTANCE LIGHT BLINKER SYSTEM | ||
| CYLINDRICAL SCREW | ||
| AM 5X10 DIN 84 - 4 S SPECIAL REQUEST DISTANCE LIGHT BLINKER SYSTEM | ||
| LOCK WASHER | ||
| B 5 DIN 127 FOR BLINKER TRANSMITTER TO BRACKET SPECIAL REQUEST DISTANCE LIGHT BLINKER SYSTEM | ||
| HEX. NUT | ||
| M 5 DIN 934 - 5 S FOR BLINKER TRANSMITTER TO BRACKET SPECIAL REQUEST DISTANCE LIGHT BLINKER SYSTEM | ||
| COUNTERSUNKSCREW | ||
| AM 4X10 DIN 63 - 4 S FOR BRACKET, BLINKER TRANSMITTER TO BRACKET, FUSE BOX SPECIAL REQUEST DISTANCE LIGHT BLINKER SYSTEM | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR BRACKET, BLINKER TRANSMITTER TO BRACKET, FUSE BOX SPECIAL REQUEST DISTANCE LIGHT BLINKER SYSTEM | ||
| A 1205400260 | OIL PRESSURE GAUGE PIPE | |
| UP TO CHASSIS 9505143 | ||
| A 1205400160 | OIL PRESSURE GAUGE PIPE | |
| UP TO CHASSIS 9505143 | ||
| A 1205400460 | OIL PRESSURE GAUGE PIPE | |
| UP TO CHASSIS 9505143 | ||
| A 1205400360 | OIL PRESSURE GAUGE PIPE | |
| UP TO CHASSIS 9505143 | ||
| 122 | A 1205400760 | OIL PRESSURE GAUGE PIPE |
| FROM INSTRUMENT TO COUPLING PIECE FROM CHASSIS 9505144 | ||
| A 1205400960 | OIL PRESSURE GAUGE PIPE | |
| FROM INSTRUMENT TO HOSE FROM CHASSIS 9506161 | ||
| 123 | A 1285420047 | COUPLING PIECE |
| FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 9505144 | ||
| 124 | A 1205400860 | OIL PRESSURE GAUGE PIPE |
| FROM COUPLING PIECE TO HOSE FROM CHASSIS 9505144 | ||
| WASHER | ||
| A 10,5 DIN 9021 FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL UP TO CHASSIS 9505143 | ||
| HEX. NUT | ||
| M 10 DIN 936-5 S FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL UP TO CHASSIS 9505143 | ||
| LOCK WASHER | ||
| B 10 DIN 127 FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL UP TO CHASSIS 9505143 | ||
| SPRING WASHER | ||
| A 8 DIN 137 FOR OIL PRESSURE GAUGE PIPE AND HOSE TO BRACKET FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL FROM CHASSIS 95051 | ||
| HEX. NUT | ||
| BM 8 DIN 439 FOR OIL PRESSURE GAUGE PIPE AND HOSE TO BRACKET FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL FROM CHASSIS 9505 | ||
| A 1369950501 | FIXING CLAMP | |
| FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL UP TO CHASSIS 4506561 | ||
| A 1369950501 | FIXING CLAMP | |
| FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL UP TO CHASSIS 4506561 | ||
| LENS-HD. SHEET | ||
| METAL SCREW BZ 3,9X9,5 DIN 7981 FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL UP TO CHASSIS 4506561 | ||
| LENS-HD. SHEET | ||
| METAL SCREW BZ 3,9X9,5 DIN 7981 FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL UP TO CHASSIS 4506561 | ||
| A 0009870932 | RUBBER HOSE, 25 MM LONG | |
| FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL UP TO CHASSIS 4506561 | ||
| A 0009870032 | RUBBER HOSE, 25 MM LONG | |
| ORDER BY THE METER FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL UP TO CHASSIS 4506561 | ||
| A 0009870032 | RUBBER HOSE, 25 MM LONG | |
| ORDER BY THE METER FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL UP TO CHASSIS 4506561 | ||
| 126 | A 0009885578 | FIXING CLIP |
| FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL FROM CHASSIS 4506562 | ||
| 126 | A 0009885578 | FIXING CLIP |
| FOR OIL PRESSURE GAUGE PIPE TO FRONT WALL FROM CHASSIS 4506562 | ||
| A 1365400259 | HOSE | |
| FOR OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9505143 | ||
| A 1365400259 | HOSE | |
| FOR OIL PRESSURE GAUGE PIPE UP TO CHASSIS 9506160 | ||
| 130 | A 1215400259 | HOSE |
| FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 9505144 | ||
| A 1215400159 | HOSE | |
| FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 9506161 | ||
| A 0005451809 | BRAKE LIGHT SWITCH | |
| PRELIMINARY DESIGN UP TO INSTALLATION OF 000 545 22 09 | ||
| A 0005450445 | RUBBER CAP | |
| PRELIMINARY DESIGN UP TO INSTALLATION OF 000 545 22 09 | ||
| A 0005451309 | PART NAME MISSING | |
| A 0005451709 | BRAKE LIGHT SWITCH | |
| 131 | A 0005452209 | BRAKE LIGHT SWITCH |
| A 1205420240 | BRACKET | |
| FOR CONNECTING SCREW UP TO CHASSIS 9506160 | ||
| A 1205421740 | BRACKET | |
| FOR OIL PRESSURE GAUGE PIPE FROM CHASSIS 9506161 | ||
| LOCK WASHER | ||
| B 5 DIN 127 FOR BRACKET TO BEARING CONTROL SHAFT | ||
| HEX. -HD. SCREW | ||
| M 5X10 DIN 933-8 G FOR BRACKET TO BEARING CONTROL SHAFT | ||
| 132 | A 0005450412 | FOOT DIMMER SWITCH |
| A 1365450058 | INSULATING PLATE | |
| FOR FOOT DIMMER SWITCH TO PEDAL FLOOR | ||
| 133 | A 1365450158 | INSULATING PLATE |
| FOR FOOT DIMMER SWITCH TO PEDAL FLOOR | ||
| LENS-HD. COUNTERSUNK | ||
| SCREW BM 4X30 DIN 7988- 4S FOR FOOT DIMMER SWITCH TO PEDAL FLOOR | ||
| 135 | A 0009902591 | CAGE CLIP WITH NUT |
| FOR FOOT DIMMER SWITCH TO PEDAL FLOOR FROM CHASSIS 5516685 | ||
| 136 | A 0009972781 | GROMMET |
| FOR CABLE TO FOOT DIMMER SWITCH | ||
| A 1205420407 | FLEXIBLE DRIVE SHAFT | |
| 137 | A 1205420307 | FLEXIBLE DRIVE SHAFT |
| A 1209950005 | FIXING CLAMP, LEFT | |
| FOR FLEXIBLE DRIVE SHAFT TO BEARING, CONTROL SHAFT UP TO CHASSIS 4504591 | ||
| 139 | A 1209950001 | FIXING CLAMP, LEFT |
| FOR FLEXIBLE DRIVE SHAFT TO BEARING, CONTROL SHAFT FROM CHASSIS 4504592 | ||
| A 1205420840 | REPLACED BY 000 988 34 78 | |
| FOR FLEXIBLE DRIVE SHAFT TO BEARING, CONTROL SHAFT FROM CHASSIS 4504592 | ||
| A 1209903140 | CLIP | |
| FOR FLEXIBLE DRIVE SHAFT TO BEARING, CONTROL SHAFT FROM CHASSIS 4504592 | ||
| A 0009883478 | CLIP | |
| FOR FLEXIBLE DRIVE SHAFT TO BEARING, CONTROL SHAFT FROM CHASSIS 4504592 | ||
| LENS-HD. SCREW | ||
| AM 5X10 DIN 7985- 4S FOR FLEXIBLE DRIVE SHAFT TO BEARING, CONTROL SHAFT | ||
| LOCK WASHER | ||
| B 5 DIN 127 FOR FLEXIBLE DRIVE SHAFT TO BEARING, CONTROL SHAFT FROM CHASSIS 4504592 | ||
| A 0009973181 | GROMMET | |
| FOR FLEXIBLE SHAFT THROUGH FLOOR AND TUNNEL | ||
| A 1839970181 | GROMMET | |
| FOR FLEXIBLE SHAFT THROUGH FLOOR AND TUNNEL | ||
| A 1869970481 | GROMMET | |
| FOR FLEXIBLE SHAFT THROUGH FLOOR AND TUNNEL | ||
| 141 | A 1809971281 | GROMMET |
| FOR FLEXIBLE SHAFT THROUGH FORKED MEMBER | ||
| 141 | A 1809971281 | GROMMET |
| FOR FLEXIBLE SHAFT THROUGH FORKED MEMBER | ||
| 142 | A 1809870044 | GROMMET |
| FOR LOCKING OF 3RD PASSAGE AT FORKED MEMBER | ||
| A 0005422720 | PART NAME MISSING | |
| A 0005427320 | PART NAME MISSING | |
| A 0005424420 | PART NAME MISSING | |
| A 0015422020 | HORN | |
| 150 | A 0015420720 | HORN |
| A 0005427120 | HORN | |
| SPECIAL REQUEST FOR CARS TO FRANCE | ||
| HEX. -HD. SCREW | ||
| M 10X28 DIN 931-8 G FOR HORN TO BRACKET | ||
| LOCK WASHER | ||
| B 10 DIN 127 FOR HORN TO BRACKET | ||
| HEX. NUT | ||
| M 10 DIN 934-5 S FOR HORN TO BRACKET | ||
| LOCK WASHER | ||
| B 4 DIN 127 FOR CABLE CONNECTION TO HORN | ||
| CYLINDRICAL SCREW | ||
| AM 4X6 DIN 84 - 4 S FOR CABLE CONNECTION TO HORN | ||
| 151 | A 0001545506 | THREE-ELEMENT VOLTAGE |
| REGULATOR FOR GENERATOR ALSO SEE GROUP 15 FROM CHASSIS 6501975 | ||
| 152 | A 0001540250 | RUBBER BUSHING |
| WITH TUBULAR RIVET FROM CHASSIS 6501975 | ||
| A 0001541706 | REGULATOR SWITCH | |
| FOR GENERATOR FROM CHASSIS 6501975 | ||
| A 0011540006 | REGULATOR SWITCH | |
| FOR GENERATOR SPECIAL REQUEST GENERATOR 300 WATT FROM CHASSIS 6501975 | ||
| LENS-HD. SCREW | ||
| AM 6X20 DIN 7985- 4S FOR GOVERNOR TO BRACKET, WHEEL ARCH PAN FROM CHASSIS 6501975 | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR GOVERNOR TO BRACKET, WHEEL ARCH PAN FROM CHASSIS 6501975 | ||
| HEX. NUT | ||
| M 6 DIN 934-5 S FOR GOVERNOR TO BRACKET, WHEEL ARCH PAN FROM CHASSIS 6501975 | ||
| LENS -HD. SCREW | ||
| AM 5X10 DIN 7985- 4S FOR GOVERNOR TO BRACKET, WHEEL ARCH PAN SPECIAL REQUEST GENERATOR 300 WATT FROM CHASSIS 6501975 | ||
| LOCK WASHER | ||
| B 5 DIN 127 FOR GOVERNOR TO BRACKET, WHEEL ARCH PAN SPECIAL REQUEST GENERATOR 300 WATT FROM CHASSIS 6501975 | ||
| HEX. NUT | ||
| M 5 DIN 934-5 S FOR GOVERNOR TO BRACKET, WHEEL ARCH PAN SPECIAL REQUEST GENERATOR 300 WATT FROM CHASSIS 6501975 | ||
| 153 | A 1205400308 | CABLE HARNESS |
| FOR GENERATOR TO GOVERNOR FROM CHASSIS 6501975 | ||
| A 6361550127 | BRACKET | |
| FOR CABLE HARNESS TO GENERATOR SPECIAL REQUEST GENERATOR 300 WATT FROM CHASSIS 6501975 | ||
| A 1869970481 | GROMMET | |
| FOR CABLE HARNESS TO GENERATOR SPECIAL REQUEST GENERATOR 300 WATT FROM CHASSIS 6501975 | ||
| SPRING WASHER | ||
| B 6 DIN 137 FOR CABLE HARNESS TO GENERATOR SPECIAL REQUEST GENERATOR 300 WATT FROM CHASSIS 6501975 | ||
| A 1809971582 | RUBBER HOSE | |
| OVER MAIN CABLE HARNESS AND GENERATOR CABLE HARNESS SPECIAL REQUEST GENERATOR 300 WATT FROM CHASSIS 6501975 | ||
| 154 | A 0009970781 | GROMMET |
| FOR CABLE HARNESS. VOLTAGE REGULATOR, GENERATOR FROM CHASSIS 6501975 | ||
| 155 | A 0005460235 | RUBBER PROTECTIVE CAP |
| FOR CABLE HARNESS TO GENERATOR FROM CHASSIS 6501975 | ||
| 156 | A 1319950020 | PIPE CLAMP |
| FOR CABLE HARNESS TO GENERATOR FROM CHASSIS 6501975 | ||
| A 1205401938 | ELECTRIC CABLE | |
| FROM TERMINAL 57 UP TO ADDITIONAL FUSE SPECIAL REQUEST FOGLIGHTS FOR CARS TO USA | ||
| INSULATING HOSE, | ||
| 250-MM LONG B 6X7,2 SW DIN 40621 FOR CABLE 39 IN MAIN CABLE HARNESS ORDER BY THE METER SPECIAL REQUEST FOGLIGHTS FOR CAR | ||
| INSULATING HOSE, | ||
| 100-MM LONG B 20X22,4 SW DIN 40621 OVER MAIN CABLE HARNESS, LIGHT ROTARY SWITCH ORDER BY THE METER SPECIAL REQUEST FOGLI | ||
| A 0005450301 | FUSE BOX, 2-POLES | |
| SPECIAL REQUEST FOGLIGHTS FOR CARS TO USA | ||
| CYLINDRICAL SCREW | ||
| AM 4X15 DIN 84-4 S FOR FUSE BOX TO FRESH-AIR DUCT SPECIAL REQUEST FOGLIGHTS FOR CARS TO USA | ||
| X XXXXXXXXXXXX | PART NAME MISSING | |
| GLOW STARTING SWITCH | ||
| A 1205400157 | GLOW STARTING | |
| SWITCH WITHOUT WIRE CABLE | ||
| 160 | A 1205400857 | GLOW STARTING |
| SWITCH WITHOUT WIRE CABLE | ||
| A 1205400957 | GLOW STARTING | |
| SWITCH WITHOUT WIRE CABLE | ||
| A 1365400457 | GLOW STARTING SWITCH | |
| 161 | A 1365450217 | GLOW STARTING SWITCH |
| 162 | A 0009902251 | OCTAGONAL NUT |
| A 1205400783 | SWITCHING HANDLE | |
| FOR GLOW STARTING SWITCH | ||
| 163 | A 1205401083 | SWITCHING HANDLE |
| FOR GLOW STARTING SWITCH | ||
| A 1205400683 | SWITCHING HANDLE | |
| FOR GLOW STARTING SWITCH | ||
| A 1205401183 | SWITCHING HANDLE | |
| FOR GLOW STARTING SWITCH | ||
| A 1205400278 | LEVER | |
| FOR WIRE CABLE OPERATION | ||
| 164 | A 1205400778 | LEVER |
| FOR WIRE CABLE OPERATION | ||
| A 1205400678 | LEVER | |
| FOR WIRE CABLE OPERATION | ||
| A 1205400878 | LEVER | |
| FOR WIRE CABLE OPERATION | ||
| TOOTHED WASHER | ||
| J 6,4 DIN 6797 PHOSPHATIERT FOR MOUNTING PIN | ||
| 165 | A 1205450076 | WASHER |
| FOR MOUNTING PIN | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR MOUNTING PIN | ||
| HEX. NUT | ||
| M 6 DIN 934-5 S FOR MOUNTING PIN | ||
| 166 | A 1919930101 | PRESSURE SPRING |
| FOR GUIDE SLEEVE, STOP SPRING | ||
| BALL | ||
| 6 MM III DIN 5401 FOR GUIDE SLEEVE, STOP SPRING | ||
| HEX. -HD. SCREW | ||
| M 5X28 DIN 931-8 G FOR LEVER TO SHIFTING SHAFT | ||
| WASHER | ||
| 5,3 DIN 433 FOR LEVER TO SHIFTING SHAFT | ||
| HEX. NUT | ||
| M 5 DIN 934-5 S FOR LEVER TO SHIFTING SHAFT | ||
| CYLINDRICAL PIN | ||
| 4 M6X16 DIN 7 FOR SHIFTING SHAFT TO GLOW STARTING SWITCH | ||
| HEX. -HD. SCREW | ||
| M 5X15 DIN 933-8 G FOR WIRE CABLE TO GLOW STARTING SWITCH | ||
| 167 | A 1365450052 | SPACER RING |
| FOR WIRE CABLE TO GLOW STARTING SWITCH | ||
| WASHER | ||
| 5,3 DIN 433 FOR WIRE CABLE TO GLOW STARTING SWITCH | ||
| LOCK WASHER | ||
| B 5 DIN 127 FOR WIRE CABLE TO GLOW STARTING SWITCH | ||
| HEX. NUT | ||
| M 5 DIN 934-5 S FOR WIRE CABLE TO GLOW STARTING SWITCH | ||
| WASHER | ||
| 5,3 DIN 433 FOR WIRE CABLE TO GLOW STARTING SWITCH | ||
| COTTER PIN | ||
| 1,5X12 DIN 94 FOR WIRE CABLE TO GLOW STARTING SWITCH | ||
| HEX. -HD. SCREW | ||
| M 6X15 DIN 933-8 G FOR BRACKET, GLOW STARTING SWITCH TO GLOVE COMPARTMENT, BOTTOM | ||
| WASHER | ||
| A 6,4 DIN 9021 FOR BRACKET, GLOW STARTING SWITCH TO GLOVE COMPARTMENT, BOTTOM | ||
| WASHER | ||
| 6,4 DIN 433 FOR BRACKET, GLOW STARTING SWITCH TO GLOVE COMPARTMENT, BOTTOM | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR BRACKET, GLOW STARTING SWITCH TO GLOVE COMPARTMENT, BOTTOM | ||
| A 1209931510 | RELEASE SPRING | |
| 168 | A 1369931410 | RELEASE SPRING |
| 170 | A 1214270059 | SEALING WASHER |
| FIXING CLAMP | ||
| 1X5 DIN 72571 | ||
| LENS-HD. SHEET | ||
| METAL SCREW B 3,9X9,5 DIN 7981 | ||
| A 0005451220 | PART NAME MISSING | |
| A 0005451320 | PART NAME MISSING | |
| A 0005451420 | GLOW CONTROL | |
| MAKE BERU OPTIONAL | ||
| 196 | A 0005451920 | GLOW CONTROL |
| MAKE BERU OPTIONAL | ||
| 196a | A 0005450621 | GLOW COIL |
| OPTIONAL | ||
| A 0005452420 | GLOW CONTROL | |
| MAKE BOSCH OPTIONAL | ||
| A 0005450721 | GLOW COIL | |
| OPTIONAL | ||
| A 0005451718 | RESISTOR | |
| MAKE BERU OPTIONAL | ||
| 197 | A 0005453218 | RESISTOR |
| MAKE BERU OPTIONAL | ||
| A 0005452218 | GLOW PLUG RESISTOR | |
| MAKE BOSCH OPTIONAL | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR RESISTOR | ||
| LENS-HD. SCREW | ||
| AM 6X12 DIN 7985-4 S FOR RESISTOR | ||
| 200 | A 0005450525 | SOCKET |
| FOR HAND LIGHT SPECIAL REQUEST | ||
| ELECTRIC CABLE, | ||
| 1.000-MM LONG A 1 DIN 72551 SW ORDER BY THE METER SPECIAL REQUEST | ||
| INSULATING HOSE, | ||
| 950-MM LONG B 3X3,8 DIN 40621 SW ORDER BY THE METER SPECIAL REQUEST | ||
| 201 | A 1205451195 | BRACKET |
| FOR SOCKET SPECIAL REQUEST | ||
| CYLINDRICAL SCREW | ||
| AM 5X10 DIN 8-4 S FOR BRACKET TO WHEEL ARCH PAN, LEFT SPECIAL REQUEST | ||
| LOCK WASHER | ||
| B 5 DIN 127 FOR BRACKET TO WHEEL ARCH PAN, LEFT SPECIAL REQUEST SOCKET FOR HAND LIGHT | ||
| HEX. NUT | ||
| M 5 DIN 934-5 S FOR BRACKET TO WHEEL ARCH PAN, LEFT SPECIAL REQUEST SOCKET FOR HAND LIGHT | ||
| X XXXXXXXXXXXX | PART NAME MISSING | |
| THREE-TUNE SIGNAL SYSTEM - SPECIAL REQUEST | ||
| A 0005424520 | HORN | |
| A 0015420820 | HORN | |
| A 0005424620 | HORN | |
| A 0015422320 | HORN | |
| A 1205420440 | BRACKET | |
| FOR HORN | ||
| HEX. -HD. SCREW | ||
| M 10X28 DIN 931-8 G FOR HORN TO BRACKET | ||
| LOCK WASHER | ||
| B 10 DIN 127 FOR HORN TO BRACKET | ||
| HEX. NUT | ||
| M 10 DIN 934-5 S FOR HORN TO BRACKET | ||
| HEX. -HD. SCREW | ||
| M 6X15 DIN 931-8 G FOR BRACKET TO WHEEL ARCH PAN | ||
| LOCK WASHER | ||
| B 6 DIN 127 FOR BRACKET TO WHEEL ARCH PAN | ||
| WASHER | ||
| A 6,4 DIN 9021 FOR BRACKET TO WHEEL ARCH PAN | ||
| HEX. NUT | ||
| M 6 DIN 934-5 S FOR BRACKET TO WHEEL ARCH PAN | ||
| A 0005420119 | CONTACTOR | |
| A 0005422719 | CONTACTOR | |
| A 1205400044 | PUSH-PULL SWITCH | |
| FOR 3RD HORN | ||
| A 0005450611 | PUSH-PULL SWITCH | |
| FOR 3RD HORN | ||
| A 1205450072 | ESCUTCHEON | |
| A 1205450237 | BUTTON | |
| A 0009972040 | FELT RING | |
| A 1205400109 | ADDITIONAL CABLE HARNESS | |
| FOR THREE-TUNE SIGNAL SYSTEM |
© 2010-2013 UAB "RPV" Paslaugų teikimo sąlygos - Privatumo politika - Kopijuoti ir naudoti komerciniais tikslais draudžiama